How to clean your washing machine from limescale?

In 90% of cases the main reason which damaged washing machines, the experts called not wear of parts and clogging of the filter of the washing machine and the scale on the Heater. It is very important to know how to clean the washing machine from scale and how to clear contamination from its basic details.

Today women’s site “” we’ll show you how to clean your car without using advertised, not always the cheapest descaler washing machines, and using a very effective folk remedy that will cost you pennies.

So, where are the main problems in the washing machine?

  • The drain filter;
  • Mold in the vessel for sprinkling powder;
  • The scale on the Heater.

The drain filter

Everyone knows that the best descaler for washing machines should save the car from the main reasons for failure – taught us that advertising. But the fact that the car shuts down and even clogged pump filter, don’t know everything. But his replacement is expensive – not less than 1500 rubles. If you do not clean the pump filter from clogging regularly, the car quickly breaks down.

Is the drain filter on the bottom of the washing machine. Look closely at the bottom there is a small box that opens or by clicking on it or by using a flat object (a penny). Inside is a pump and a thin hose with a filter they protect the machine from clogging.

The filter is going to the trash. If the pump is clogged, the water will go through the top. In addition, you will need to repair the car, I think that the neighbors you flooded, too, will require financial compensation to repair them.

In order to clean the filter, a circular cap must be turned to off (not always easy) and rinse well. You will see that the filter collected the particles of wool, paper and even some of the items a trifle and the like.

Don’t forget to substitute the machine of low capacity – from a hose will flow water. By the way, with a very unpleasant smell.

Also clean from debris should the cuff (elastic casing), which is around the washing machine door. There is also often hides a trifle, paper clips, small pebbles and other items that we forgot to remove before washing of the pockets.

To clean the cuff after each wash: remove debris and wipe the rubber (cuff) dry with a cloth – this will prevent the formation of mold, which not only corrodes the casing, but also dangerous to health. The door should be left slightly ajar.

Capacity for sprinkling powder — boroscoping

It is important not only to clean the machine from scale (more about this later), to release the filter from debris, but also to clear the container of powder from plaque and mold — that there are going to the most dangerous bacteria and fungi. It is not enough to remove and clean compartments from the RAID, it should be done more carefully using the tool to clean the toilet.

Why cleaning toilets? Because it contains chemicals (chlorine, for example), which fight bacteria. To clean boroscoping, you need to take the following actions:

  • Extract from the compartment capacity for powder.
  • Rinse it under running water.
  • Drop into a bowl of water, to which add any tool to clean the toilet. Leave everything for 1 – 2 hours. During this time, the plaque can be easily removed.
  • Further, it will be enough good to walk an old toothbrush to proshparennye to fully get rid of plaque.
  • Don’t forget to clean the hole itself, which is inserted into the container for sprinkling powder or other means. Just don’t do it drugs with chlorine – they can corrode the rubber hoses.
  • To do a serious cleaning 1 – 2 times a month.

    So, with the “visible” enemy, we understood, now go to the secret – those which are deposited inside the machine and accumulate on the Heater. We understand how to clean your machine from scale and do I have to buy for this descaler for washing machines.

    How to clean your machine from limescale?

    That is the main cause of failure of washing machines – scale, all learned from advertising.

    How can you ignore the lady standing in knee-deep water and harsh master, waving in front of her spoiled item from the washing machine? “Use “Calgon” with each wash!” — the verdict of the master. And thousands of innocents, believing the advertising regularly buy Calgon to save from destruction his assistant, oblivious to the fact that advertising one move to get the masses to buy the product, and another task is to understand all the intricacies.

    So, what is the scale? This is the deposition of salts of calcium and magnesium, which leads to breakage of the machine – it’s true. Therefore, to clean the heater of the washing machine from scale a must, but also try to prevent the formation of scale.

    But whether cope with this and other Calgon descaler for washing machines? To answer this question, we will understand how the scale appears on teploelektroenergetiki.

    • It is formed when water is heated above 80 degrees, so the first thing to do is to use less of the mode of boiling.
    • Also, the scum formed from impurities that make the water hard. It must therefore be mitigated.

    Can Calgon to solve these problems and save the car from the scale? To mitigate the water – can, and descaled – NO!

    Descaler for washing machines to be added with each wash, not clean never the heater from scale. The main active ingredient of all funds from the scale – tripolifosfat sodium. They salt doesn’t dissolve! Besides the cost of 1 kg of that substance 16-20 rubles.

    How much is a pack Calgon? Several times more expensive! Is it worth paying that kind of money?

    Again please note: Calgon, Alphagan and other publicized means that it is recommended to add with each wash – this is the usual softeners of hard water (like soda ash), but using them is optional.

    • First, now softeners add all the powders – enough to soften the water. Why add washing the same 2 times?
    • Secondly, to know how exactly do you soften hard water, you need to make the analysis of water hardness lab. If the fabric softener to add a little scale on the Heater is formed, if a lot of the water softener is also deposited on the parts, which is also not good for the machine.

    By the way, the experts considered that the use of Calgon will cost more than the repair of the car to replace the heating element. So if you know you have hard water, and decided to soften it further, to reduce the risk of scale formation, you get the easiest available Descaler or soda ash – that will be enough!

    How to deal with scum in washing machines?

    Of course, it is not necessary to bring the car to the formation of scale on the Heater. There is one proven available means of prevention is recommended to clean the washing machine descaling with citric acid. To be honest, this method is used even in some of the service centers for servicing of appliances.

  • 4 – 5 kg washing machine need 200 grams of citric acid.
  • Fill it in the compartment for powder and include 1 – 2 hour idle washing at a temperature of 80 – 90 degrees.
  • To use citric acid to clean the washing machine from scale it is possible not more often 1 time a year. But this is enough to clean ten. Citric acid is very corrosive, often it can not be used – the machine can cause damage.

    If you do not want to use citric acid, you can buy ready descaler that use 1 time a year, not for every wash. They are also based contain acid.

    They should be used, read this manual carefully. Some tools add idle washing, in others – soaked shot ten. Positive feedback about the tools from the scale for washing machines can be found about these drugs: Merloni, Bubble Ice, Astonish, Filtero, ARCH-TVN.

    When caring for the machine and its correct operation (e.g., set to vibrate less, less to wash at high temperatures) the car will last a long time. Well, if you decide to use Calgon and similar tools, do it rarely, to “the break” is the advice of a good master’s service.

    The author – Julia Spiridonova, site

    How to clean your washing machine from limescale? uses cookies to be better. Before you continue reading, you must agree terms and conditions

    The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.