How to make a brooch with your own hands: master class

Brooch – one of the few accessories that is used with any outfit. It will enhance a business suit, evening dress, casual dress. The main thing – correctly to pick up the brooch, so that it, at first glance, a simple decoration, emphasized personal style and femininity.



Today women’s site ToKnow365.top tell and show the master class, how to make a brooch with your own hands.

Accessories

In order to make a brooch, we will need:

1. Rivoli Swarovski 16 mm

2. Beads of different colors and shapes:

  • round Japanese seed beads №11, color: white, blue, blue
  • round Japanese seed beads №15, color: white, blue
  • cylindrical beads No. 11 (Miyuki Delica or Toho Triers), color: white

Round Japanese glass seed beads №11 you can replace Czech No. 10 or No. 11, and the Japanese No. 15 Czech No. 13 or No. 14.

3. Large beads (approximately 2 mm long and 3 mm diameter, ideal for Toho beads No. 8), color: blue

4. Pearls in the form of rice or beads (approximately 7 mm in length and 4-5 mm in diameter), color: white

5. Bicone 4 mm, color: blue

6. Basis for brooches

7. Needle, monofilament

Make a brooch with your own hands: master class

Attention! The pictures can be clicked to enlarge the image!

The first stage. The beaded Rivoli Swarovski crystal

Let’s make so-called stop bead. It will not allow the beads to fall apart. On the needle, put on the bead of any color and again go through it with a needle on the same side. In the picture the black represents the direction of the thread.

Recruited 40 beads Delica number 11 in white.

Next, type one Delica and pass the needle in the 39-th Delico dialed chain.

Again abirem Delica and pass the needle in the 37-th Delico chains, etc.

Last podpletennaya bead will be included in the 1st Delico dialed number.

Remove stop bead and tie a knot.

Pass the needle in the 40th bead of the first row. And bring in the 41-th.

Re-enter 1st, then 2nd. Thus, we combine the first row in the ring.

Begin to weave the second row the wrong side. Delicay inserted between the first row of round beads number 15.

When the entire row is finished, the needle with the last bead the second row is in the 2nd Delica the first row and the 1st bead of the second row.

Begin to weave the third row is wrong side. Between the beads of the second row of the inserted bead number 15. Odplata beads of smaller size, we are narrowing our circle. This will allow the Crystal, which we odletem firmly. The design of the reverse side completed.

Translate the needle on the front side. To do this, go through 3 Delica in the first row.

Begin to weave the second row of the front side. Between the beads of the first row woven Delica.

After the second row bring the needle into the next bead of this row.

The third row of the front side: we are going to alternate the colors of the beads №15. First poplatek 2 white beads, then 2 blue again 2 white, 2 blue. Rivoli Swarovski inserted into the frame and depletes a row, alternating colors as before.

Deduce the needle into the next bead of the third row of the front side and begin to weave the fourth row.

Between the white beaded plug-in white # 15, blue blue. Get white and blue triangles.

We finished braid Rivoli.

Second phase: decoration Rivoli

Go to the first row. Pidplates between the beads of the first row Delico. If you look at this number in expanded form (figure below), Delica we pidplates between the red dots. Ie the needle is introduced in V. 1 recruit Delico injected the needle into V. 2, dialed Delico entered in T. 3, etc. Get the second row of ornaments.

Weave the third row of decorations.

Step 1. We pass in the next Delica the second row of ornaments. Recruited pearl, blue faceted 4 mm round bead of white color No. 11.

Pass the needle back through the bicone and the pearl. And introduce the needle into the next Delica the second row.

Step 2. Recruit a large bead of blue color (No. 8) and wodim a needle in the following Delico the second row of ornaments.

Then alternate Step 1 and Step 2 until the end of the round.

Fourth row decoration:

Step 3. Recruit 4 round beads number 15 blue, one round No. 11 white, 4 round blue number 15.

Step 4. Pass through the white No. 11 of the previous row (on top of nikonusa).

Step 5. Repeat Step 3 and pass through the next blue number 8 of the previous row.

Then repeat Steps 3, 4, 5 to the end of the round.

Will get:

Further, we need to hold the needle to white round beads number 11 of the previous row (in the picture below from t 1 to t 2).

Fifth row decoration:

Step 6. Recruit more and enter in round white No. 11 the following pattern ( 3).Thus, we put a round between T. 2 and T. 3.

Step 7. Hold a needle up to vol. 4

Steps 6 and 7 repeat. Thus, put a bicone between T. 2 and T. 3, T. 4 and T. 5, etc.

Sixth row decoration.

Deduce the needle into the nearest bead blue No. 8 of the third row of decorations. The first pass in the next round blue number 15 of the fourth row of ornaments.

Step 8. Recruit one round white No. 15, entered the last round blue number 15 the previous pattern of the fourth row and pass the same blue 8 and white Delica.

Step 9. Recruited blue round No. 15 and pass into the next Delica, blue number 8, and the first blue No. 15 the following pattern.

Repeat Step 8 Step 9 to the end of the round.

The seventh row of decorations.

Bring the needle to the nearest blue No. 8 (vol. 1)

Step 10. Recruited Delico white, 3 blue No. 15, white Delica. Introduce the needle in the bicones at the top of the pearl (vol. 2). We pass in the white No. 11 (T. 3) on top of nikonusa.

Step 11. Return needle in the round (2). Recruited Delico white, 3 blue No. 15, white Delica. Go through the next blue No. 8 (vol. 4)

Repeat Step 10, Step 11 to the end of the round.

The eighth series of jewelry.

After the previous step, our needle is withdrawn from the blue number 8.

Step 12. Recruit round blue bead no. 11. Pass the needle to the nearest blue No. 15 of the sixth series. Again, dial round blue No. 11 and pass into the next blue number 8.

Execute Step 12 to the end of the round.

Our brooch embellished!

Site ToKnow365.top offers its readers to experiment with the decoration of brooches. You can change the color, size and shape of the bead to get the individual and unique brooch made with your own hands.

The third stage. Attaching bases for brooches

Translate the needle on the wrong side and sew a basis for brooches to beads inside.

Hide the strings. Our brooch is ready!

By using the website ToKnow365.top we at the master class made the brooch with your own hands. It remains to choose an outfit and decorate it with a new accessory!

Olga Novikova — specifically for the site – ToKnow365.top.
Photo — Olga Novikova.

How to make a brooch with your own hands: master class





toknow365.top uses cookies to be better. Before you continue reading, you must agree terms and conditions

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close